NV-PL-048 NVT Phybridge Polre Switch Poe Bridge Pbx Port

Review NVT Phybridge Polre Switch Long Reach Poe Bridge Pbx 48 Port Single Pair

The NVT NV-PL-048 PhyBridge PL-048 PoE Bridge is a versatile and powerful 48-port PoE (Power over Ethernet Plus) switch designed for use in Voice over IP (VoIP) and Private Branch Exchange (PBX) systems. This single-mode switch is ideal for businesses and organizations that require a high density of Ethernet ports to support their communication infrastructure.

Each port on the NV-PL-048 is capable of delivering up to 30 watts of PoE power, making it suitable for powering a wide range of IP devices such as VoIP phones, IP cameras, and wireless access points. The switch supports both IEEE 802.3af and 802.3at PoE standards, ensuring compatibility with a broad range of PoE devices.

One of the key features of the NV-PL-048 is its ability to act as a PoE bridge. This means that it can be used to extend the reach of a PoE network beyond the limits of a standard PoE injector. The switch can be configured to power PoE devices located up to 328 feet (100 meters) away from the main switch using standard Cat5e or Cat6 cabling.

The NV-PL-048 also includes a number of advanced features to enhance network performance and reliability. These include support for Link Aggregation Control Protocol (LACP) for load balancing and redundancy, IGMP snooping for multicast traffic optimization, and port mirroring for network monitoring and troubleshooting.

The switch has a compact, rack-mountable design, making it easy to integrate into existing network infrastructure. It also includes a user-friendly web interface for configuration and management, as well as support for SNMP and CLI for more advanced users.

Overall, the NVT NV-PL-048 PhyBridge PL-048 PoE Bridge is a high-performance and versatile networking solution for businesses and organizations that require a large number of PoE ports for their VoIP and PBX systems. Its advanced features, reliability, and ease of use make it a great choice for any organization looking to upgrade their communication infrastructure.

The NVT NV-PL-048 PHYbridge PL-048 PoE Bridge is a 48-port single PoE switch designed to extend Power over Ethernet (PoE) and data transmission over long distances. Here are some pros and cons that might help you make an informed decision about purchasing this product:

1. Long-distance PoE transmission: The PHYbridge technology allows for PoE and data transmission up to 728 feet (222 meters) over two pairs of Category 5e or higher UTP cables, making it ideal for installations where traditional Ethernet cables may not reach.

2. Cost-effective: By using existing cabling infrastructure, this switch can save on the cost of installing new cabling, making it a cost-effective solution for businesses looking to extend their network.

3. Energy efficiency: The Power over Ethernet (PoE) technology allows for power and data transmission through a single Ethernet cable, reducing the need for additional power outlets and cabling.

4. PoE support: The switch can provide power to PoE devices such as IP phones, cameras, and access points, making it a versatile solution for businesses with various PoE devices.

5. Easy installation: The plug-and-play design allows for easy installation, with no need for complex configuration or additional software.

1. Limited features: Compared to more advanced switches, the NV-PL-048 PoE Bridge has limited features, such as no QoS, VLAN, or port mirroring capabilities.

2. Limited PoE budget: The switch can only provide a total of 110W of PoE power, which may not be sufficient for installations with many high-power devices.

3. Limited PoE devices per port: Each port can only support a single PoE device, which may not be enough for installations with multiple devices per port.

4. Limited management options: The switch has limited management options, with no web interface or SNMP support.

In conclusion, the NVT NV-PL-048 PHYbridge PL-048 PoE Bridge is an excellent solution for businesses looking to extend their network over long distances using existing cabling infrastructure. Its cost-effectiveness, PoE support, and easy installation make it a popular choice. However, its limited features and PoE budget may not make it the best fit for businesses with more advanced networking requirements.

If you are looking for a cost-effective solution for extending your network over long distances and have limited PoE requirements, the NVT NV-PL-048 PoE Bridge is a recommended option. However, if you require more advanced features such as QoS, VLAN, or SNMP, you may want to consider a more advanced switch.

Details:

The bridge is working as designed, factory reset to default, ready for new deployment, 192.168.100.1 admin/admin. Buyer agrees to pay $8 Nvt phybridge PL-048 polre switch long reach poe bridge for pbx 48 port single pair. No speed degradation with longer distance. Poe over single-pair UT cable with up to 1,200ft 365m reach.

It is designed to support the most demanding IP endpoints with plenty of band width spare. Dc voltage : 48vdc-56vdc ; endpoint devices must be compliant with IEEE 802.3af. Use of them does not imply any affiliation with or endorsement by.

specifications voipbusiphone:

• brand: Nvt
• mpn: Nv-pl-048
• model: Pl-048
• type: Polre Long Reach Poe Bridge
• color: Gray
• features: Power Over Ethernet
• interface: Ethernet, Cat 3

offer voipbusiphone:

• price: $999.00
• item condition: Seller refurbished
• availability: in stock
• started: november 22, 2025
• options: ship-to-home
• in stock #: 1
• sold #: 14

payments voipbusiphone:

• credit card: discover
• wallet: google-pay
• other

shipping voipbusiphone:

• transit: 3-7 days
• class: standard
• type: fixed
• service: standard

returns voipbusiphone:

• policy: no returns

seller voipbusiphone:

• rating: 99.9%
• city: stockton, california
• # reviews: 16379

general voipbusiphone:

• category: Computers > Computers/tablets > Enterprise Networking, Servers > Voip Business Phones/ip Pbx