NV-PL-024 NVT Phybridge Polre Switch Poe Bridge Pbx Port

Review NVT Phybridge Polre Switch Long Reach Poe Bridge Pbx Port Single Pair

The NVT NV-PL-024 PhyBridge PL-024 PoE Bridge is a versatile 24-port PoE (Power over Ethernet Plus) switch and PoE injector combination designed for use in VoIP (Voice over Internet Protocol) and data communications applications. This single-mode, 10/100/1000Mbps switch supports IEEE 802.3af and 802.3at PoE standards, providing power to connected devices while transmitting data.

The switch's 24 ports are configured as 24 independent PoE ports, allowing you to power and connect devices such as IP phones, surveillance cameras, and wireless access points. Each port features a status LED to indicate power and link activity, making it easy to monitor the network's health at a glance.

One unique feature of the NVT NV-PL-024 is its PoE bridge capability. This function allows the switch to extend PoE power up to 30 meters over two Cat5e or Cat6 cables. This is particularly useful when installing IP phones or other PoE-powered devices in locations where power outlets are not easily accessible.

Another notable feature is the switch's support for various mounting options, including rack-mount and wall-mount configurations. This flexibility makes it an excellent choice for various deployment scenarios, from small office environments to larger enterprise networks.

The NVT NV-PL-024 also comes with advanced management features, including SNMP (Simple Network Management Protocol) support, IGMP snooping, and QoS (Quality of Service) capabilities. These features enable network administrators to monitor and optimize their networks for better performance and efficiency.

In summary, the NVT NV-PL-024 PhyBridge PL-024 PoE Bridge is a high-performance, 24-port PoE switch and PoE injector combination designed for use in VoIP and data communications applications. Its unique PoE bridge capability, support for various mounting options, and advanced management features make it a versatile and valuable addition to any network infrastructure.

The NVT NV-PL-024 PHYbridge PL-024 PoE Bridge is a 24-port single PoE switch with Power over Ethernet (PoE) pass-through capability. This device is designed to extend PoE over long distances and provide power to connected devices even when the main power source is disconnected. Here are some pros and cons of buying this product:

1. PoE Pass-Through: This switch allows you to provide PoE power to devices connected to the switch, even when the main power source is disconnected.

2. Long-Distance PoE: The switch can extend PoE power over long distances, making it ideal for use in large buildings or campuses.

3. 24 Ports: The switch has 24 ports, which is sufficient for many small to medium-sized installations.

4. Easy to Install: The switch is easy to install and configure, making it a good choice for those who are not IT professionals.

5. Cost-Effective: Compared to other PoE switches with similar features, the NVT NV-PL-024 PHYbridge PL-024 is relatively affordable.

1. Limited Features: This switch does not offer advanced features such as Quality of Service (QoS) or link aggregation.

2. Power Consumption: The switch consumes more power than some other switches due to its PoE pass-through and long-distance capabilities.

3. Limited Compatibility: This switch may not be compatible with all devices, particularly those that require a high amount of PoE power.

In conclusion, the NVT NV-PL-024 PHYbridge PL-024 PoE Bridge is a cost-effective solution for small to medium-sized installations that require long-distance PoE and PoE pass-through capabilities. However, it may not be suitable for larger installations or those requiring advanced features. Therefore, it is recommended for organizations with simple PoE requirements and a limited budget.

Details:

Buyer agrees to pay $8 Nvt phybridge PL-024 polre switch long reach poe bridge for pbx 24 port single pair. No speed degradation with longer distance. Use of them does not imply any affiliation with or endorsement by. Dc voltage : 48vdc-56vdc ; endpoint devices must be compliant with IEEE 802.3af.

The bridge is working as designed, factory reset to default, ready for new deployment, 192.168.100.1 admin/admin. It is designed to support the most demanding IP endpoints with plenty of band width spare. Poe over single-pair UT cable with up to 1,200ft 365m reach.

specifications voipbusiphone:

• brand: Nvt
• mpn: Nv-pl-024
• model: Pl-024
• type: Polre Long Reach Poe Bridge
• color: Gray
• features: Power Over Ethernet
• interface: Ethernet, Cat 3

offer voipbusiphone:

• availability: in stock
• in stock #: 1
• options: ship-to-home
• sold #: 14
• price: $999.00
• item condition: Seller refurbished
• started: november 22, 2025

general voipbusiphone:

• category: Computers > Computers/tablets > Enterprise Networking, Servers > Voip Business Phones/ip Pbx

shipping voipbusiphone:

• type: fixed
• service: standard
• class: standard
• transit: 3-7 days

returns voipbusiphone:

• policy: no returns

payments voipbusiphone:

• other
• wallet: paypal
• credit card: mastercard

seller voipbusiphone:

• # reviews: 16381
• rating: 99.9%
• city: stockton, california